Pole Shaft

The shaft is extruded from all new 6063 alloy aluminum tubing and heat treated to produce a T6 temper.

Anchor Base

Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The anchor bolts and nuts recess in the base casting, sitting flush, and are covered by four (4) tamper-resistant aluminum nut cover discs.

Product Line
Part Number Mounting Height Effective Projected Area Shaft Dimensions Base Info Base Plate Spec Sheet
80 90 100 120 Sq. Wall Thick. Anchor Bolt Diameter Bolt Circle Square Height
SLP-SSA-4-8-1 8 13.8 10.8 8.4 7.3 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-10-1 10 10.6 8.3 6.3 4.5 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-12-1 12 8.4 6.5 4.8 2.6 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-14-1 14 6.8 5.1 3.7 1.5 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-15-1 15 6.1 4.5 3.2 0.9 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-16-3 16 8.9 6.8 5 2.1 4 0.188 .75 x 20 8.5 9.1 2 View
SLP-SSA-4-18-1 18 4.4 3.1 2.1 N/A 4 0.125 .75 x 20 8.5 9.1 2 View
SLP-SSA-5-18-3 18 12.6 9.6 7.1 2.9 5 0.188 .75 x 20 10.5 10.4 2.5 View
SLP-SSA-4-20-3 20 6.3 4.6 3.2 1 4 0.188 .75 x 20 8.5 9.1 2 View
SLP-SSA-5-20-3 20 10.8 8.1 5.8 1.5 5 0.188 .75 x 20 10.5 10.4 2.5 View
SLP-SSA-6-20-3 20 16.4 12.4 9.2 3.8 6 0.188 1 x 40 12 12 2.75 View
SLP-SSA-5-2-53-VD 25 7.3 5.1 3.3 1 5 0.188 .75 x 20 10.5 10.4 2.5 View
SLP-SSA-6-25-3-VD 25 11.6 8.4 5.8 2 6 0.188 1 x 40 12 12 2.75 View
SLP-SSA-6-25-4-VD 25 16.5 12.3 8.9 2.2 6 0.25 1 x 40 12 12 2.75 View
SLP-SSA-6-30-3-VD 30 8 5.4 3.2 N/A 6 0.188 1 x 40 12 12 2.75 View
SLP-SSA-6-30-4-VD 30 12.1 8.7 5.8 2 6 0.25 1 x 40 12 12 2.75 View